Split barrel type lab twin screw extruder l ,screw dia. 27mm for experiment and trial production output 80kg/h
Technical datas
| Model | HPL27A | HPL27B | HPL27C |
| Parameter |
| Screw diameter(mm) | 27 | 27 | 27 |
| L/D | 32～60 | 32～60 | 32～60 |
| Main motor (kw) | 18.5 | 22 | 37 |
| Max. Speed (rpm) | 750 | 960 | 1500 |
| T/A3(Nm/cm3) | 10.5 | 9.6 | 10.7 |
| Center distance(mm) | 22 | 22 | 22 |
| OD/ID | 1.55 | 1.55 | 1.55 |
| Output (kg/h) | 2～60 | 2～80 | 2～100 |
Application
1. Engineer plastics granule: ABS,PC,POM,PP, PBT,PE,PA
2. Special Engineering Plastics: PA 6T,PA9T,LCP,PPS, PEEK;
3. Rubber-plasitcs blend modification: PP,PE,PS+SBS,PA+EPDM,EVA+silicon rubber
4. Ploymer blending :PC+ABS, PA+ABS,CPE+ABS,PP+EPDM,PA+SBS,etc.
5. Masterbatch:color masterbatch, function masterbatch,white masterbatch and black masterbatch
6. Polymer compounding and modification,filler compounding and fibre reinforcement.
7. Extruder for film production line: BOPP,BOPET,BOPI,BOPA,BOPS film, battery separator film, seawater desalination film,etc.
Our advantages
1. High output
The output is 1-2 times larger than the same size extruder from other lower torque twin screw extruders.
The biggest extruder can output up to 12T/h per set.
2. Energy-saving
For the same output , our small size extruder can replace the big size of other extruder, such as our HPL51 has more output than other 65 extruder , smaller extruder, less energy consumption,less material consumption, smaller production areas.
And we use heat rod instead of cast copper heater, which can save 15%-20% energy.
3. Advanced design
High torque: carrying capacity factor of gearbox up to 15Nm/cm3;
High speed: max. 1800rpm/m；
4. Long service life
bearings on output shaft 2 without load, which greatly extended the service life of the bearings on the weak axis , gearbox life can reach 72000 hours (10 years)；
5. Custom made design
Wide D/d choice:1.33～2.0;
Custom made clearance: minimum clearance can be 0.15mm；
About us
We are dedicate to develop, design, and manufacture co-rotation, counter-rotation parallel twin-screw extruder production line.Our extruders have the advantages of “high torque, high efficiency, low energy-consumption, high price/performance ratio, long service life ” (designed service life of gearbox as long as 72000 hrs). We keep the same step with the most advanced extruder manufaturers in the world.
We can supply :Twin screw extruder production line;
High torque gearbox;Automatic long fiber reinforced thermoplastic composites (LFT - D) production line;Counter-rotation parallel twin screw extruder;Differential concentration mixer;
Repairing and machining large parts; Design, machine all of screw elements on Japan and Germany extruders.
Parts and advantages
| Transmission gearbox |  | The most advanced structure: bilateral symmetry gear drive system; it’s the same with the gearbox of German Flanders, Austria EssenBas.Now, the first-line extruder manufacturers in the world, such as Corperion,Berstorff, Leistritz, Toshiba, JSW are using the transmission structure; servcie life of the gearbox≥72000hrs. |
| Screw element |  | Various kinds of function elements, mixing and dispersing elements developed by ourselves can provie flexible production for kinds of materials and production process. Optional material: W6Cr5Mo4V2, Ni-based alloy, HIP alloy,Co-based alloy. |
| Barrel |  | Barrels are equipped with integrated wear-resistant alloy steel liner, which has the same composition and wearing feacture with W&P .Our mirror polishing seamless barrels, surface finish Ra0.2, verticality between barrels inner hole≤0.015mm；linearity of ten assembled barrels≤0.05mm； Optional material: W6Cr5Mo4V2, Nitriding steel, Tool steel, Ni-based alloy, HIP alloy,Co-based alloy. |
| Torque limiter |  | Steel ball type safety clutch + torque limiter Made in Germany have the characteristics of accurate torque protection, high repeatability and quick reset. |
Product Tags:
|
|
50HZ 3 Phase Lab Twin Screw Extruder Split Barrel Type For Compounding Images
|
